Luxul AGS-1016 - Manual (Page 5)

Simply Connected
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
CAUTION: Please use the correct power cord for your environment. If
any voltage other than 100/240 is applied, it will result in
damage to the AGS-1016.
PREPARING FOR INSTALLATION
System Requirements
„
Network Connections: Ethernet Enabled Computer
„
Web Browsers: Internet Explorer 6.0 or higher, Mozilla 1.0 or higher, Safari 1.0
or higher
„
Internet: Broadband Internet Service (depending on the service provider, a
separate modem may be required)
Before Connecting to the Network
The AGS-1016 can be rack-mounted or used as a desktop switch. Before connecting
to the network, please be aware of the following requirements:
„
Install the AGS-1016 in a stable/safe place to avoid any possible damage
„
Make sure there is adequate space around the AGS-1016 for adequate ventilation
and proper heat dissipation.
„
Do not place heavy articles on the AGS-1016.
„
Power outlets should be within 5 feet of the AGS-1016.
„
Check the power cord to confi rm a secure connection.
„
Ensure there is suffi cient space around the AGS-1016 for proper ventilation and
heat dissipation. It is recommended to have at least 4-6 inches around all sides.
„
When installing the AGS-1016 on a surface, attach the rubber feet to the bottom
of the device to avoid scratching the surface.