Luxul XBR-2300 - Manual (Page 5)

Simply Connected
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
PREPARING FOR INSTALLATION
System Requirements
„
Ethernet Cables to connect the XBR-2300 to Ethernet enabled devices
„
Computer supporting TCP/IP and equipped with a Web browser. Supported
Web browser versions include Microsoft IE 6.0 and up, Safari 1.0 and up or
Mozilla Firefox 1.0 and up. The Web browser is used to configure the XBR-2300.
„
Power must be AC 100-240V~ 0.1A 50/60Hz.
Before Connecting to the Network
The XBR-2300 can be rack-mounted or used as a desktop router. Before connecting
to the network, please be aware of the following requirements:
„
Install the XBR-2300 in a stable/safe place to avoid any possible damage
„
Make sure there is adequate space around the XBR-2300 for adequate ventila-
tion and proper heat dissipation. It is recommended to have at least 4-6 inches
around all sides.
„
Power outlets should be within 5 feet of the XBR-2300.
„
Verify the ground connection of the outlet is functioning properly.
„
Check the power cord to confirm a secure connection.
„
When installing the XBR-2300 on a flat surface, attach the rubber feet to the
bottom of the device to avoid scratching the surface.
XBR-2300 INSTALLATION
Installing the XBR-2300 in a Rack
The XBR-2300 can easily be installed in a standard 19” rack. The XBR-2300 includes two
mounting ears for installing and stabilizing the router. For attaching the mounting ears
and installing the router within a rack, please refer to the following illustration:
Rack-Mounting the XBR-2300