Simply connected, Package contents, Hardware description – Luxul XBR-2300 User Manual
Page 3: Front panel, The following items should be included in the box, Xbr-2300 dual-wan router, Power cord, Two l-shaped rack mounting brackets and screws, Four rubber pads, Xbr-2300 front panel view
Simply Connected
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
3
PACKAGE CONTENTS
The following items should be included in the box:
XBR-2300 Dual-WAN Router
Power Cord
Two L-shaped rack mounting brackets and screws
Four rubber pads
Quick Installation Guide
If any of the listed items are missing or damaged, please contact the reseller from
whom you purchased for return/replacement.
HARDWARE DESCRIPTION
Front Panel
XBR-2300 Front Panel View
Factory Reset Button: Used to restore factory default settings.
To reset to factory defaults, press and hold the reset button until the SYS
LED turns off, approx. 10 seconds. A factory reset may take approximately a
minute to complete. A successful Factory Reset is indicated by all of the Port
LEDs fl ashing once. When the SYS LED begins to fl ash once per second the unit
is ready.
NOTE: To hard reset the router use the power switch. Turn the router
off, wait 10 seconds and turn the unit back on.
CAUTION: Resetting the XBR-2300 to factory defaults will remove all
custom settings.