Simply connected, Preparing for installation, Xwr-1750 installation – Luxul XWR-1750 User Manual

Page 5: System requirements, Desktop installation, Wall installation, Hardware setup

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

PREPARING FOR INSTALLATION

System Requirements

Computer supporting TCP/IP and equipped with a Web browser. Supported Web
browser versions include I.E. 9, Firefox 25, Safari 5, Chrome 30, and up. The Web
browser is used to confi gure the XWR-1750.

Power must be AC 100-240V~ 1.0A 50/60Hz.

XWR-1750 INSTALLATION

Desktop Installation

For use as a desktop device, position the XWR-1750 on a desk or other horizontal
surface with adequate room around the XWR-1750 for ventilation.

Wall Installation

The XWR-1750 Is keyholed to allow installation on a wall or ceiling. Use the
Mounting Pattern (Page 8-9) for keyhole alignment.

Hardware Setup

Attach Antennas: Connect the included Dual-Band Antennas to all three
antenna ports.

NOTE: All three antennas should be installed prior to powering up the

XWR-1750 and are required for optimal performance.

WAN Connection: Connect the Ethernet cable from the modem/router equip-
ment provided by your Internet Service Provider (ISP) to the black WAN port of
the XWR-1750.

AC Power: Connect the included AC Adapter to the XWR-1750 fi rst and then to
the AC outlet.