Simply connected, Advanced settings, Connect a client device – Luxul XAP-1500 User Manual

Page 9: Login

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

Parameter: Default Value

Default IP address: 192.168.0.16

Default user name: admin

Default password: admin

The Luxul XAP-1500 default IP addresss is 192.168.0.16. If the IP address of your router
is not set to the 192.168.0.X network, a temporary static IP address must be set
on the computer being used for configuration. To do so, set the IP address of the
computer to the 192.168.0.X range and then use the default IP address of your XAP-
1500 as the Gateway/Router. Once configured, set the computer IP configuration
back to “Obtain Automatically/DHCP.”

NOTE: Go to

http://luxul.com/how-to-videos

for videos about

changing the IP address of your Operating System.

Connect a Client Device

Connecting a Wireless Client Device: Connect the client device to one of the
XAP-1500 default wireless networks (

Luxul1500_24 or Luxul1500_5X). Both

Wireless networks will run in Open Security mode. A passphrase is not required
until Wireless Security is configured.

Connecting an Ethernet Device: Use Ethernet cable to connect your computer
or device to one of the XAP-1500 LAN ports.

NOTE: Only devices that support 5GHz will see Luxul1500_5X wireless

network.

Login to the XAP-1500 with the following steps:

1. Open a Web browser, and enter 192.168.0.16. The access point login screen

will appear.

2. Enter the user name and password (default user name and default password

are both set as “admin”), and then click “OK” to login to the access point
configuration interface.

ADVANCED SETTINGS

For advanced settings information go to luxul.com