Luxul XAP-1500 - Manual (Page 4)

Quick Install Guide XAP-1500
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XAP-1500 029150958
4
XAP-1500 Rear Port View
PoE Injector LED Indicators
Name Status Function
PWR On Power is connected to the injector
Off Injector is not receiving power
PREPARING FOR INSTALLATION
System Requirements
„
Computer supporting TCP/IP and equipped with a Web browser. Supported Web
browser versions include I.E. 9.0, Firefox 10.0, Safari 5.0, Chrome 10.0, Opera 10.6
and up. The Web browser is used to confi gure the XAP-1500.
„
Power must be AC 100-240V~0.3A 50/60Hz.
XAP-1500 INSTALLATION
The XAP-1500 high powered access point is designed for optimal performance
as well as for simple and effi cient installation and setup. It designed for mount-
ing on the ceiling, wall or placed on a desktop or other fl at surface. Because the
signal generated by the XAP-1500 is omnidirectional, the unit should be mounted
on a ceiling or wall directly in the center of the desired coverage area. Note that
orientation of the unit is less important than the mounting location.
Ceiling and Wall Mounting
The XAP-1500 comes with a circular mounting bracket to mount it to the wall or
ceiling. Use the Mounting Pattern (Page 6-7) for mounting bracket alignment.