Lumagen Radiance XS-3D - Manual (Page 21)

Section 4 – Basic Commands
RadianceXS rev 091211 13
Status Screen
Pressing “OK” when the menu is off displays an on-screen information message as shown in the example below.
RadianceXS-3D Info Pg 1 (for Pg 2 press Ok)
SW Rev.xxxxxx Serial:xxxxxxxxx
Input 1A Out1 Out2
Resolution: 480i 1080p 1080p
Refresh: 59.94Hz 59.94Hz 59.94Hz
Color Fmt: YCbCr 422 RGB RGB
HDCP: On Off On
Pressing “OK” when the information screen is displayed, will display a second status screen as shown in the
example below.
RadianceXS-3D Info Pg 2
Audio:HDMI1
In aspect=16:9 Out aspect=1.78 Zoom=0%
X scaler: On AdjInHres: 1914 OutHRes:720
Y scaler: On AdjInVres: 1077 OutVRes:480
Genlock: currently off
Deinterlacing:NA Game mode:Off
On-Screen Help
Pressing, “HELP” when the menu is displayed, displays on-screen help information for the currently highlighted
menu item for many of the menu options.
Quick Keys
Provides a menu to use for basic remotes that have limited buttons, The ‘Quick Keys’ menu has buttons for input
aspect ratio (4:3, LBOX, 16:9, 1.85, 2.35, NLS), set zoom (Zoom+, Zoom-) and select the user memory (MemA,
MemB, MemC, MemD). The “Quick Keys” menu duplicates the function of pressing the corresponding buttons on
the Lumagen remote. There are also buttons to control 3D (off, SbyS, TopB).
MENU → Quick Keys → (4:3, LBOX, 16:9, 1.85, 2.35, NLS, Zoom+, Zoom-, MemA, MemB,
MemC, MemD, ‘3D’Off, ‘3D’Sbys, ‘3D’TopB)