Dualit Kitchen Blender - Manual (Page 8)

• Plug power cord into earthed socket. Blender is now ready
for use. Please Note: The Red “standby” light indicates that
there is power to the Blender. This light changes to a Green
light when the blades are running .
• Place ffu ulllly y a asssse em mb blle ed d jju ug g onto power base.
• Insert foodstuffs into the jug.
• Attach lid, ensuring the safety plunger is in place. FFiig g.. 2 2
Keep hand on rear of lid to ensure safety switch is engaged.
• Switch unit on using , the red power light will flash.
• Turn speed control knob to desired setting. FFiig g.. 4 4
• Press the start/stop button , the red flashing light ,
will turn to a green light and the blades will rotate.
• To turn off, press the start/stop button again.
• To pour, using the handle, lift the jug vertically upwards off
the blender base, remove the lid to pour.
• The speed can be adjusted when blending by turning the
speed knob in either direction.
• All speeds can be used with pulse button . On the speed
control knob 1 1 is slow 5 5 is fast.
• When blending warmed foods, d do o n no ott add ‘hot’ liquids to
glass jug. A Allw wa ay yss a allllo ow w lliiq qu uiid d tto o cco oo oll b be ello ow w 6 60 0°°cc b be effo orre e a ad dd diin ng g
tto o tth he e jju ug g.. Place gloved hand over the lid and only operate
on slow speed.
• Do not insert frozen foods into jug taken directly from a hot
dishwasher.
• Do not plug in until you have assembled your blender and
unplug straight after use. Fig. 1
• Prior to first use, wash lid , jug and blade unit .
• Place the jug onto the power base .
• Push the lid onto the jug and at the rear of the lid
locate the plunger into the Safety Interlock System . Fig. 2
• The Dualit blender has a double Safety Interlock System that
prevents the motor running unless the lid and blade is correctly
__ in position.
Your blender comes with a unique double Safety Interlock
System. Only use with the glass jar and lid firmly in place,
ensure the lid and plunger are correctly positioned into the
Safety Interlock System. Fig. 2
A small micro switch detects if the blade assembly is locked
into the collor and is located in the correct position. If the jug
and blade unit are not correctly assembled the motor will not
start.
ALWAYS PLACE ONE HAND ON TOP OF THE LID WHEN THE
MOTOR IS RUNNING. ENSURE SAFETY INTERLOCK IS FIRMLY
ENGAGED.
TO ASSEMBLE YOUR BLENDER
3
4
4
5
3 4
2
SAFETY INTERLOCK SYSTEM
USING YOUR BLENDER
6
7
9
9
9
10
7
6
8
8
4
4
13
11
2
3
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 8