Lock'er Down Model LD 2040 User Manual
Lock'er Down Safety

Installation Instructions for Model 2040 Console Safe
Lock'er Down® is a registered Trademark of Lock'er Down, Inc. US Reg. Number 4183198 All Rights reserved.
The Lock’er Down Model 2040 fits the 2014 1500 Series Sierra and Sil-
verado.
It is a good idea to set the combination before you install the safe,
and do it with the door open.
Clear the contents out of the compartment.
Pop out the plastic pocket that sets between the 12 volt power port
and the multi-media ports.
Remove the rubber pad in the bottom of the console.
Remove the two silver colored bolts in the bottom of the console.
Remove the plastic file folder rails on each side of the console, this is
done buy sliding them forward will pulling out on the center of the
rail to release a detent.
Remove the small light to the right of the latch.
Place the safe in the console and attach to the console mounting
plate where you just removed the two bolts using the included bolts.
Replace the file folder rails and the light.
Enjoy your purchase.