Lock'er Down Model LD 2012 User Manual
Lock'er Down Safety
Installation Instructions for Model 2012 Console Safe
Lock'er Down® is a registered Trademark of Lock'er Down, Inc. US Reg. Number 4183198 All Rights reserved.
First remove the cover on the underside
of the console lid to expose the four
screws attaching the lid to the hinge.
On either end of the hinge is a plastic cover
that must be removed next. You can use a
small screw driver or even a finger nail.
Detailed photos on back.
Now, remove the two bolts holding the console to
the truck body. You will need a 10MM socket.
Place the Lock’er Down Console Safe inside the console and attach to the
truck body through the console with the supplied longer bolts.
Reverse the procedure above to reinstall the console hinge and lid.
We hope you enjoy.