LINK Systems Max Presence Sensing Device - Manual (Page 13)

Link Lite Black Max Section 3 - Installation
3-8
Figure 3.7. Shows remote segment units
mounted on a straight side press with
columns extended beyond the bed and
slide.
Figure 3.7: Remote segment Black Max
units mounted between columns of straight
side power press to detect a person standing
inside the primary sensing field.
The mounting requirements for remote
segment Black Max units are generally the
same as for main transmitter and receiver
units except that when used for
supplemental guarding between the main
sensing field and the hazard, there is no
safety distance, D
s
, requirement for the
location of remote segment units.
NOTE! If remote segment units are used in
any manner intended to extend and be part
of the main sensing field, safety distance
requirements will then apply to the remote
segment units.
Figure 3.8: Remote segment Black Max units oriented at an angle to sense a person
between the primary sensing field and the hazard.