Lingenfelter L710650197 Lingenfelter C5 Corvette High Flow Fuel Pump 1997-2002 v2.9 - Manual (Page 9)

Page 8.
21. Using a pair of Oetiker pliers (or side cut-
ting pliers), crimp the end of the clamp in the
squared off section as shown to secure the
hose to the top of the housing.
22. Install the fuel pump electrical connector
as shown. Notice the extruded end of the con-
nector will fasten into place as shown.
23. Install the two (2) ground wires to the top
of the fuel pump housing. It does not matter
which order you install them, they simply pro-
vide a ground for the module.
24. If you are installing a new module seal on
the fuel tank (GM part # 12459863 or AC Delco
part # G25), place it as shown and insert the
fuel pump module into the tank, followed by the
float arm. Be careful not to damage any of the
components while inserting the module into the
tank. Do not attach the transmitter before at-
tempting to slide the module back into the tank.