Lingenfelter L710650197 Lingenfelter C5 Corvette High Flow Fuel Pump 1997-2002 v2.9 User Manual
Page 4
Page 3.
1. Turn off ignition key and disconnect the
negative battery terminal. Wrap or secure the
negative battery terminal so that it does not
make a ground connection to the battery or
chassis.
2. Raise the vehicle on an automotive lift or
with jack stands at the points recommended by
the manufacturer. Refer to the owner’s manual
or a shop manual for further specifications. To
avoid any vehicle damage, serious personal
injury, or death, when major components are
being removed from the vehicle and the vehicle
is supported by a hoist, make sure to support
vehicle with jack stands at the opposite end
from which the components are being removed.
3. Here is the Lingenfelter high flow fuel
pump assembly.
Note: The new crimp type hose clamp that is
taped or zip tied to the body; remove it now for
later installation.
4. Remove the driver side rear wheel to gain
better access to the fuel pump assembly. Using
10 mm and 13 mm sockets, remove the four (4)
13 mm bolts and the 10 mm bolt that retain the
end cap on the fuel tank panels.