Lingenfelter L710050607 Lingenfelter Suburban & Yukon XL Fuel Pump 2007 v1.1 User Manual
Page 2
Parts List
#
Part number
Description
1
TI-GSS340
TI/Walbro fuel pump
1
TI-125-135B
fuel pump pre-filter
1
TI-71-54
plastic convoluted fuel hose
1
TI-94-615
GM fuel pump adapter wire harness
1
MAG48-46-00-007
fuel pressure regulator adapter fitting
2
12077411
Metri-Pak 280 terminals
1
L760010607
fuel pump adapter ring
2
52545 K45
Oetiker clamp, 11.3 mm
0.5
TI-122-332
fuel pump adapter sleeve (cut in half)
1
22682111
fuel sender O-ring seal
1
L920010000
LPE decal
1
installation instructions
Optional Items
•
Kenne Bell Boost-A-Pump (20 amp model listed, 40 amp model can also be used)
• PN KB-89066 for naturally aspirated applications (vacuum trigger switch)
• PN KB-89067 for boosted applications (pressure trigger switch)
Tools Needed
• small pocket screwdriver
• sharp knife or razor blade
• wire cutters
• hook tool (can also use small screwdriver)
• wire stripping tool
• wire crimping tool
• Oetiker clamp crimping tool or diagonal cutter
• terminal pin tool
Fits The Following Vehicles
• 2007 2500 Chevrolet Suburban and Yukon XL with GM fuel pump module part # 19133475
Installation note for high mileage vehicles:
If you have a high mileage vehicle, we recommend changing the fuel filters inside the module. The
primary fuel filter is not currently available as service part from GM so changing these filters requires
purchasing an all new fuel pump module. Complete fuel pump modules are available from LPE, GM or
your AC Delco distributor.
Page 1 of 6