Lingenfelter L650182012 Lingenfelter ZL1 Camaro Air Intake Kit 2012-2013 v1.6 - Manual (Page 4)

Page
2. Remove the engine cover by pulling the
front of the cover up and away from the engine.
3. Unplug the Mass Air Flow (MAF) sensor
connector, which is located on the side of the
airbox inlet, by first sliding the grey tab to unlock
the connector. Then, press on the center tab and
pull the connector away from the airbox inlet.
Do NOT pull the sensor connector by the wires -
pull from the plastic connector itself.
4. Loosen the hose clamps securing the
rubber air inlet tube to the throttle body using an
8mm socket.
3.
1. Open the hood. If you have been driving
your vehicle, allow a couple hours for the engine
to cool down before beginning installation.