Lingenfelter L650140709 Lingenfelter Cadillac CTS-V Air Intake Duct v1.3 - Manual (Page 10)

Page
25. Mount the front coupler on the throttle
body and tighten down the band clamp. Make
sure to position the inlet as indicated to the left
and reconnect your PCV hose.
26. Install the other coupler in the kit to the air
filter housing and tighten down the band clamp
on housing.
27. Loosen both band clamps and put them on
both couplers. Gently work the LPE provided
elbow into both couplers. Move each band
clamp towards the elbow and tighten when it
reaches the edge of the coupler as shown.
Install the supplied Lingenfelter decal on the
duct as shown.
28. Start your vehicle and listen for any
leaks. If there are any problems check all the
sensors and vacuum lines for proper hook up
and position.
9.