Lingenfelter L650050704 Lingenfelter Cadillac CTS-V Airbox 2004-2007 v3.1 - Manual (Page 7)

Step 7. Installation of rubber seal
- Three strips of rubber seal are included with the kit. The longest of the three seals goes on the top of
the air filter heat shield and simply presses on, as shown in step 6. Push firmly to make sure the seal is
completely seated on the plastic.
Step 8. Install air filter heat shield
- Install the rear of the heat shield first, then the front. NOTE: make sure you place the coolant hose in
the notched out area of the heat shield to avoid pinching the hose. (See picture below)
Step 9. Mounting the rear of the air filter heat shield
- Install the push rivet removed in step 5 to secure the rear of the air filter heat shield.
Page 6 of 11