beautypg.com

Lingenfelter L450080000 Lingenfelter TVS Diode v1.4 User Manual

Page 3

background image

Installation

Solenoid

Install the TVS diode across the solenoid

wires as close to the solenoid as possible.

Polarity does not matter (Red and Black wires

can go to either solenoid wire). If there is no

accessible ground terminal to connect the

diode to, such as the case with a transbrake

solenoid, the diode should be connected to

the nearest ground source. In the case of the

diode for the trans-brake solenoid, the diode

should be connected to the transmission case

as it will provide a ground path.

Page 3 of 3

L450080000 TVS Diode Instructions v1.4.indd

For additional product installation information and technical support, contact LPE

or your LPE products distributor. You can also find technical support and usage

discussions regarding this product and many other LPE products in our Internet

forums:

http://www.lingenfelter.com/LPEforumfiles

Lingenfelter Performance Engineering

1557 Winchester Road

Decatur, IN 46733

(260) 724-2552

(260) 724-8761 fax

www.lingenfelter.com

LPE recommends using TVS diodes on:

• Nitrous solenoids

• Line-lock solenoids

• Trans-brake solenoids