beautypg.com

Lingenfelter L350191410 Lingenfelter Camaro Shift Knob & Boot Adapter v1.1 User Manual

Page 5

background image

Page 4.

10. Remove the black threaded ring that is

screwed onto the end of the LPE shift knob.

NOTE: If you are installing the LPE shift

knob boot adapter kit (as shown in this

instruction manual), the black threaded ring

will not be used during installation.

8. Flip the shift boot inside out to expose the

bottom of the new shift boot collar. Place

the opening on the shift boot into the groove

cut into the collar. Use the included zip-tie

to secure the shift boot to the shift collar.

You will want to get the zip-tie as tight as

possible. Once the zip-tie is sufficiently

tightened, snip off the excess length of zip-

tie, taking care not to leave a sharp edge

on the zip-tie that could damage the boot.

Once this is complete, turn the shift boot

back to it’s normal orientation.

9. Select the rubber shift knob adapter with the

largest inside diameter and install it onto the

end of the shift lever.

11. Place the LPE shift knob boot adapter onto

the gear lever with the tapered end pointing

up. Then push the shift knob onto the shift

lever. The shift knob should bottom out

on the shift lever when the shift knob is

adequately pressed on.