Lingenfelter L350191410 Lingenfelter Camaro Shift Knob & Boot Adapter v1.1 - Manual (Page 2)

Page 1.
Parts List
LPE Shift Knob Boot Adapter Kit (PN: L350191410)
# Description Part number
1 Shift knob boot adapter (for 2010-2013 Camaro SS) XX05158-0007
1 Zip-tie 23923-X
1 Instructions N/A
Optional Items
# Description Part number
1 LPE Momo shift knob, black with black stitching L350140000
1 LPE Momo shift knob, black with silver stitching L350150000
1 LPE Momo shift knob, black with red stitching L350160000
Tools & Materials Required
• Metric calipers (or equivalent)
• 2.5mm Allen wrench (included in kit)
• Phillips head screwdriver
• small flat head screwdriver
• scissors
• knife (or equivalent)
Thank you for purchasing the Lingenfelter Performance Engineering (LPE) 2010-2013 Camaro SS
shift knob boot adapter kit. This LPE shift knob boot adapter kit is designed to take some of the
slack out of the 2010-2013 Camaro SS shifter boot, greatly improving the fit and appearance of your
aftermarket shift knob.
This manual describes the steps necessary to install the LPE shift knob boot adapter along
with a LPE Momo shift knob. If you are installing this boot adapter with a different aftermarket
shift knob, the required installation steps may vary. The LPE shift knob boot adapter has a
internal thread of M22 x 1.0.
If you are installing a LPE Momo Shift knob, keep in mind that the shift pattern embossed on
the shift knob is the V8 shift pattern and is not correct for V6 models.
Read the entire instruction manual before beginning installation. Some stock parts may be
used in reassembly.
When referencing the side of the vehicle, the driver side of the vehicle is considered the left
side and the passenger side of the vehicle is considered the right side of the vehicle.