Lingenfelter L350080197 Lingenfelter C5 Corvette Mini Tub Kit - Manual (Page 12)

Page 11.
36. Measuring from the reference mark that
you made on the body, locate and drill the
plastic panel so you can use the stock threaded
hole.
37. Remove the rear shocks from the vehicle.
Pull the dust cover boot off of the shaft of the
shock, slide the supplied the round black plastic
spacer onto the shaft and re-install the dust
cover boot.
38. Install the shocks using the supplied shock
brackets. The machined depression on the
bracket should face downward.
39. Install the 3 stock “J” nuts on the hat
brackets and re-install the panel.