Lingenfelter L220220206 Lingenfelter C6 Z06 Corvette 10 Rib Supercharger Drive Kit v0.1 - Manual (Page 3)

Page 2.
Read the entire instruction manual before beginning installation. Some stock parts will
be used in reassembly.
When referencing the side of the vehicle, the driver side of the vehicle is considered the
left side and the passenger side of the vehicle is considered the right side of the vehicle.
1. Open the hood of the vehicle. If you have
been driving the vehicle, allow the vehicle to
cool down for a few hours before starting this
installation.
2. Remove the factory damper and power
steering and alternator pulleys from the vehicle.
Also remove the water pump and idler from the
vehicle.
3. Install the supplied power steering and
alternator pulleys on the vehicle. Also install
the new water pump and damper on the vehicle
using the factory GM torque specifications. DO
NOT RE-INSTALL THE IDLER AT THIS TIME.