LG Motorsports LG Drag Spindles - Manual (Page 5)

Figure 6: Lower Control arm clearance for 15” wheel
Once the spindle is complete, you will re-install it just like the OEM unit making sure to
hook up your wheel speed sensor wires, tie rod ends, parking brake cable, and
upper/lower ball joint nuts.
Please follow instructions in your service manual on installing the base model brakes
onto your car if you are un-sure of how the items fit.
Take a moment to go over all connection points and brake system. If you installed new
calipers be sure to do a full bleed on the brake system and check for leaks.
Figure 7: Rear drag spindle installed with brakes