Legacy Audio Goliath XD - Manual (Page 9)

Speaker Connections
9
Once you’ve found a place in your room, the next step is connecting the Goliath XD to your
existing system.
Option 1: Connecting one or two Goliath XD using LFE output
If you are utilizing Goliath XD as the dedicated LFE channel for a surround system, connect the
LFE output from your surround processor to the XLR input 3 of your Xilica processor. Connect an
XLR cable from the Xilica processor output 1 to the XLR input on the rear of the Goliath XD
subwoofer.
If you will be connecting a second
Goliath XD to your LFE channel,
connect an XLR cable from the
Xilica processor output 5 to the XLR
input on the rear of the right Goliath
XD subwoofer.