Legacy Audio Goliath XD - Manual (Page 11)

NOTE: Try to plug into the same AC circuit as the rest of your audio system, as this will avoid
hum from ground loops.
NOTE :
Speaker Connections
Power up the Xilica processor before the Goliath XD subwoofer to avoid sending
unnecessary transients through the subwoofer.
11
Powering Up Goliath XD
1. Power Cable: The supplied power cable will plug into the socket on the back terminal
plate of the unit.
2. Power Up: In the rear of the subwoofer is the power switch. Push the switch upward to
turn the unit on.