Lamar Technologies CA 1550 - Manual (Page 40)

Certificate of Calibration
REPORT AND CERTIFICATION OF CALIBRATION
Manufacturer:
Power Products, Inc. 27 Pamaron Way, Bldg E
Novato, CA 94949, (415) 883-6300 www.power-products.com
Date of Test________________
P/N ___4159CML______ S/N_____________ Model_CA-1550CML_____ MFR Date_____
Description:
* Military Battery Charging Battery Discharge
Commercial Combination Charger/Discharger
High Pulse Restoration *NSN ____________________
Other __________________________________________________
Notes on Calibration:
1. All instruments used for calibration are calibrated to standards traceable to National
Institute of Standards and Technology.
2. Test instruments are calibrated annually by a certified test laboratory in accordance with
MIL-STD-45662A and/or ISO10012:2003, ANSI/NCSL Z540-1 and ISO/IEC17025.
3. Power Products Inc. has a DOD approved Quality Control manual on file for QC and test
procedures and conforms with inspection requirements of MIL-I-45208, and U.S. NAVSEA,
Corona, CA Division calibration for P/N CA1550-MIL.
Report: Test Instruments Used:
Fluke 8010A Fluke 73
Empro Standard Shunt, 0.5% Leader Oscilloscope LS1020
Standard Cell Reference: Other: _____________________
EMF Reading for Multimeter
before each test to 1.019V.
Results:
All controls within specification.
All digital/analog displays within calibration specification.
Shipped condition all in tolerance, passed.
Tested by _________ Date _________ Approved By _________ Date _________
Calibration due one year from date of first use:
Recommended Required
CA-1550 CHARGER / ANALYZER - OPERATING MANUAL V1.2 Page 38