Laerdal SimView - Manual (Page 3)

3
1 Introduction
Session Viewer is a standalone application for viewing and editing exported SimView debriefing files, SimPad
log files and BLS result files.
If you license Session Viewer you can also record the activities during a Standardized Patient Recording or
Laerdal manikin scenarios controlled by Instructor Applications. When a USB-camera and a microphone and
or a Patient Monitor are added to the PC, can you record both video and audio to support the debriefing of
the scenario with the students after the training session. In the following you will find instruction on how to
connect and use USB camera, Patient Monitor and a microphone with Session Viewer.
2 Cautions and warnings
• By using this product, Laerdal® Medical does not condone the use of this system for violating any
government, state or local laws or personal rights.
• Laerdal® Medical will not be responsible for loss or stolen property due to the use nor failure of
operation of this equipment.
• Read understand, and follow all equipment instructions, safety warning and guidelines before
operating the Laerdal® Session Viewer and all associated equipment.
3 Technical requirements and installing the software
Session Viewer and LLEAP computer requirements:
Hardware
Minimum: Recommended:
CPU i3 or higher (multi core) I5 or higher (multi core)
CPU Mark 2500 or higher 3500 or higher
RAM 2GB 4GB
Hard drive 50GB free 100GB free
Software
Windows Edition
7 Pro, 7Ultimate, 8 Pro and
8.1 Pro.
7 Pro, 7Ultimate, 8 Pro
and 8.1 Pro.
Display resolution 1280x1024 or higher 1366x768 or higher
USB Cameras:
Supported: Logitech web cameras: C920, c920C and c920e.
Session Viewer is installed as a part of LLEAP, or separately from a downloaded installer.
When installed read on in chapter 3.1 on next page.