beautypg.com

Remote control setup, Remote control supporting the multi brand devices, Notices – Daewoo DT- 4280NH User Manual

Page 13

background image

Remote Control Setup

14

- The remote control provided is designed to operate the Daewoo PDP set.
- However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting

Receiver of other brands after setting up the remote control.

HOW TO SET UP THE REMOTE CONTROL FOR US ING OTHER DEVICES .

• Turn on the Device. (Cable Converter, VCR , DVD or Satellite Broadcasting Receiver)
• Press the device selection button of remote control until it is flickering. It takes about 3 seconds.
• Press the assigned three digits code of the device using number key button of the remote Control toward the

IR receiver of the device. The code number is provided below. Whenever pressing the number, the device
selection button will be flicked once.

• If the code is set properly, the device will turn off automatically. If not, repeat the process 3.
• As the device is turned off, press the flickering device selection button of the remote control once.

Then the lamp of the button will be turned off.

• Now, the setting-up of the device can be controlled by Daewoo PDP remote control.

Remote Control Setup Code

DAEWOO

002 008 060 062 063 067
068

JVC

003 006 009 043 044 046
084 089
111 114 124

MITSUBISHI

046 052 075 122

PANASONIC

016 070 087 088 106

PHILIPS

005 040 042 045 048 049
053 064
078 081 090 108

SAMSUNG

041 055 056 059 061 065
066 091 095

SHARP

048 049 057 074

SONY

047 050 051 076 080

DVD

DAEWOO

152 160

LG

150 168 169

PANASONIC

157 170

PHILIPS

155

SAMSUNG

151 163 164

DAEWOO

002

PANASONIC

030

PHILIPS

018 031 032

SAMSUNG

079

For more device codes, contact Daewoo
service centre

Remote control supporting the multi brand devices.

Notices:

- All the preset codes are erased when replacing the battery. In this case, you must set the remote control again.

- Some of the products may not be applied because of different signal system.

- This is only for the basic control of the devices.

VCR (STANDARD : 002)

SAT (STANDARD : 002)

Maker (Brand) Name

Code Number (3 digit) List

Maker (Brand) Name

Code Number (3 digit) List