Labconco Purifie Non-Ventilated PCR & Tissue Culture Enclosures 3952420 - Manual (Page 10)

Product Service 1-800-522-7658 6
C
HAPTER
3
G
ETTING
S
TARTED
Now that the site for your non-ventilated Purifier PCR or Purifier Tissue Culture
Enclosures is properly prepared, you are ready to unpack, inspect and install your
non-ventilated enclosure. Read this chapter to learn how to:
• Unpack and move the enclosure.
• Set up the enclosure with the proper supporting structure and work surface.
• Connect the electrical supply.
• Seal the enclosure to the work surface.
Depending upon which model you are installing, you may need wrenches, ratchets,
sockets, a nut driver set, a flat-blade screwdriver, a Phillips screwdriver, and a
carpenter level to complete the instructions in the chapter.
The enclosures weigh 100 lbs. (45 kg). The shipping container
allows for lifting with a mechanical lift truck or floor jack. If
you must lift the enclosure manually, follow safe-lifting
guidelines.
Do not lift by the front lower support .
!