Labconco Two and Six-Place (Macro) Kjeldahl Distillation Systems 2127603 User Manual
Page 8
Product Service 1-800-522-7658
5
C
C
h
h
a
a
p
p
t
t
e
e
r
r
2
2
:
:
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
General Installation Notes
The Two and Six-Place Kjeldahl Distillation Systems are shipped fully
assembled. The Two-Place Kjeldahl Distillation System water supply and drain
can be connected by the customer to a common laboratory faucet. The Two-Place
Kjeldahl Distillation System comes with an 8-foot, 3 wire cord and plug.
The Six-Place Kjeldahl Distillation System will require electrical and water
supply/drain connections which should be made by a licensed contractor. The
customer will need to purchase the required Kjeldahl flasks, with rubber stoppers
and distillate receiving flasks. The glass connecting bulbs and delivery tubes are
provided with each Kjeldahl Distillation System.
Connecting Bulbs and Delivery Tubes
are included with Macro Kjeldahl Systems.
For installation of the Connecting Bulbs
and Delivery Tubes see section on Glassware
Installation.
Use caution when you remove the protective packaging material taped to the
heater runways as fragile components are involved. Levelers are shipped
installed, as are the distillation cooling water thermometers.
Location
The Two-Place Kjeldahl Distillation System can be carried by hand to its final
location.
The Six-Place Kjeldahl Distillation System is heavy. Special arrangements should
be made in advance for moving the system to its final location. Special instruction
tags are attached to the apparatus; they must not be removed until the installation
has been completed.