Labconco Biological Safety Cabinets 34609 Series - Manual (Page 69)

Appendix D: Accessories
Product Service 1-800-522-7658 64
Hydraulic Base Stand Shelf Kit (# 3850200)
This 22 ¼ x 11 ¼-inch long shelf is specifically designed to hold the
Aspirator Pump or other small accessories, and attaches to the lower left side
of the base stand. The kit includes shelf and self-drilling fasteners. NOTE:
A power drill with a 5/16-inch socket is needed to attach the fasteners to
the base stand.
SoLo Electric Hydraulic Lift Base Stands
These base stands permit the Logic to be lowered enough to be transferred
through a standard doorway as low as 78 inches. Casters provide mobility
and lock in place. The SoLo Stands for each Purifier Cell Logic Series are
listed below.
Width Cell Logic Series # 115V SoLo Stand # 230V SoLo Stand #
3' 34309-xx 3780310 3780314
4' 34409-xx 3780311 3780315
5' 34509-xx 3780312 3780316
6' 34609-xx 3780313 3780317
*Seismic Bracket Kit (# 3857000)
Stainless steel brackets and attaching hardware to secure Telescoping Base
Stands in areas of seismic activity (does not include fasteners to attach to
floor).
*Service Valve Kit (# 3747500)
Includes serrated hose tip ball valve with quarter turn handle, hardware and
instructions for plumbing to services mounts on left or right side interior. All
cabinets are factory prepared to accept up to 4 fixtures. Shipping weight 4
lbs. (2 kg).
Ultraviolet Lamp Kits
Includes a 254 nm UV lamp and ballast.
Note: Not recommended for Purifier Cell Logic Biosafety Cabinets with
Scope-Ready Package.
Catalog # For use with Shipping Weight
3858500 All 115 VAC models 5 lbs. (2.3 kg)
3858501 All 100 VAC models 5 lbs. (2.3 kg)
3858502 All 230 VAC models 5 lbs. (2.3 kg)