beautypg.com

Explanation of graphic symbols, Standards important safety instructions, Introduction – Lab.gruppen E 8:2 User Manual

Page 4

background image

4

Explanation of graphic symbols

To prevent electric shock do not remove top or bottom covers. No

user serviceable parts inside. Refer servicing to qualified service

personnel.

Français: à prévenir le choc électrique n’enlevez pas les couvercles.

Il n’y a pas des parties serviceable à l’intérieur. Tous reparations doit

etre faire par personnel qualifié seulment.

To completely disconnect this equipment from the AC mains,

disconnect the power supply cord plug from the ac receptacle. The

mains plug of the power supply cord shall remain readily operable.

Français: Pour démonter complètement l’équipement de

l’alimentation générale, démonter le câble d’alimentation de son

réceptacle. La prise d’alimentation restera aisément fonctionnelle.

Standards

Important safety instructions

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

15. WARNING: To reduce the risk of fire of electric shock, do not expose

this apparatus to rain or moisture.

16. Do not expose this equipment to dripping or splashing and ensure

that no objects filled with liquids, such as vases, are placed on the

equipment.

17. Do not connect the unit’s output to any other voltage source, such

as battery, mains source, or power supply, regardless of whether

the unit is turned on or off.

18. Do not remove the top (or bottom) cover. Removal of the cover will

expose hazardous voltages. There are no user serviceable parts

inside and removal may void the warranty.

19. An experienced user shall always supervise this professional audio

equipment, especially if inexperienced adults or minors are using

the equipment.

Introduction

The information contained in this Quick Start Guide is sufficient for proper installation of E Series amplifiers, and for configuration of
settings in typical applications. Please refer to the full Operation Manual for detailed information on maintenance, cooling requirements,
warranty, and configuration for complex installations .

The lightning bolt triangle is used to

alert the user to the presence of

un-insulated “dangerous voltages”

within the unit’s chassis that may be

of sufficient magnitude to constitute a

risk of electric shock to humans.

The exclamation point triangle is used to

alert the user to presence of important

operating and service instructions in the

literature accompanying the product.

This equipment conforms to the requirements

of the EMC Directive 2004/108/EC and the

requirements of the Low Voltage Directive

2006/95/EC.

Standards applied: EMC Emission

EN55103-1, E3

EMC Immunity EN55103-2, E3, with S/N

below 1% at normal operation level.

Electrical Safety EN60065, Class I

This equipment is tested and listed according

to the U.S. safety standard ANSI/ UL 60065

and Canadian safety standard CSA C22.2

NO. 60065. UL made the tests and they

are a Nationally Recognized Testing

Laboratory (NRTL).

This manual is related to the following products: