Krix Epix - Manual (Page 7)

2. 2.
3. 3.
1 1
!
11
!
7
installation
install enclosure using temporary braces
1. The installation braces are supplied
factory fitted for 10mm plaster board
installation. If 13mm plasterboard is to be
used, follow the instructions printed on
brace. This ensures the front baffle of the
speaker will sit flush with the plasterboard
wall.
Ensure installation brace bolts are tight
before proceeding.
2. Ensure speaker enclosure is level.
3. Fix temporary braces to studwork using
supplied zinc Phillips head screws.
!
!