Krix Epix - Manual (Page 11)

Frequency Range 40Hz - 40kHz in room response
Power Handling Maximum 200 watts RMS amplifier power into 4ohms
Sensitivity 90dB for 2.83 volts at 1 metre
Configuration 6 driver 3-way bi-wireable / bi-ampable
Bass Drivers 4 x nominal 130mm (5”) coated paper cones. 26mm (1”)
voice coil wound on high powered aluminium former provides
good linearity and driver control at large cone excursion.
Midrange Driver 1 x nominal 130mm (5”) coated paper cone. 26mm (1”)
voice coil wound on high powered aluminum former,
using copper shorting ring and oversized magnet for lower
distortion.
Tweeter 26mm (1") dual concentric diaphragm with wave-guide centre
plug for controlled directivity. Non-reflective dual chambered
magnet structure with copper shorting ring to lower distortion.
Crossover Point 340Hz & 2.5kHz
Impedance Nominally 4 ohms
Enclosure Type Triple chambers – sealed midrange chamber, with dual bass
reflex chambers, front vented.
Dimensions box: 1700mm high x 390mm wide x 80mm deep
front baffle: 962mm high x 225mm wide x 18mm deep
Material 12mm MDF enclosure, 25mm braces, with 18mm MDF front
baffle
Finish Black Suede Vinyl
Volume 34 litres internal
Weight 27kg each
11
specifications
warranty
5 year warranty applies to the cabinet and
speaker.
(Refer to the details on the warranty card
supplied)
queries
If you have any queries regarding the Epix
setup procedure or any other Krix product,
please contact your nearest Krix retailer or Krix
directly. Contact details are on the back cover
of this booklet.
Epix: specifications