Directed Electronics Honda/Acura SIRIUS Interface HON-SC1 - Manual (Page 18)

© Directed Electronics, all rights reserved.
1
Troubleshooting guide:
PROBLEM PROBABLE SOLUTIONS
No tuner Check for loose connections.
Check that connector alignment/orientation is correct.
Check that cables are not pinched or damaged.
Check that fuse is not blown.
Check that the factory XM module has been disconnected.
Check for incorrect connections, some vehicles may have similar aftermarket modules
installed that utilize the same type of connector.
SL100/ SL2 does not enter
SIRIUS connect mode
Check SIRIUS website for the most recent firmware updates.
Antenna Error Check that antenna is connected
Location (line of sight blocked) may not be conducive to good signal
Abbreviated/Truncated Text Character length varies on different display units, as a result some prompts such as
"Acquiring Signal" may appear as "Acquiring S" or "Acquiring ", Antenna Error" may
appear as "Antenna Err", "Firmware Update" may appear as "Firmware Up" etc.
Locked/Skipped Channel This interface module does not support clearing locked or skipped channels
Note: When Channel Number is displayed, updates and error messages are hidden from view. The user must exit this
mode by using the toggle text "DIsp/Mode" switch to view messages.