Installation – Directed Electronics Honda/Acura SIRIUS Interface HON-SC1 User Manual

Page 10

Installation

Directed Electronics recommends that you have this prod-

uct professionally installed. It is recommended that prior to

starting the installation, you thoroughly read this manual

and follow the guidelines listed below:

Some installations may use the factory satellite radio

tuner location. If you are using this location, please follow

the factory instructions for installing the HON-SC1 in your

vehicle. If you are not using this location, please read the

following installation guidelines.

Consider the mounting location carefully. You should make

sure that you avoid the following:

• Any location where the unit is exposed to moisture.

• Any location where the unit is exposed to extreme heat.

• Any location that would interfere with moving parts on

the vehicle or hamper driving.

Mounting the HON-SC1 Interface: Be sure that you find

a location that is flat and has clearance above the unit to

prevent any damage as well as allow for ventilation.

Do not install the HON-SC1 under the carpet or in a small

enclosed area without proper ventilation. Doing so can

result in damage to the tuner or the vehicle.

Use the supplied screws to securely fasten the unit.

Note: Refer to SCC1 or SC-VDOC1 manuals for additional

installation instructions needed to complete the system.