Konig Electronic Infrared remote control extender - Manual (Page 8)

Care and Maintenance
Keep the IR-EGGS2 Remote Extender dry. If it gets wet,
wipe it dry immediately.
Use and store the IR-EGGS2 only in normal temperature
environments. Extreme temperature can shorten the life of
electronic devices
Handle the IR-EGGS2 gently and carefully. Dropping it can
damage the circuit board and can cause it to work improperly.
Keep the IR-EGGS2 away from dust and dirt, which can
cause premature wear of parts.
Wipe the IR-EGGS2 with a damp cloth occasionally to keep
it looking new. Do not use harsh chemicals, cleaning solvents,
or strong detergents.
Specifications
Operating Voltage ............................................230 or 240 VAC, 60Hz/
DC 12V, 150mA
Power Consumption (pair).................................................4 Watts Max
Transmission Frequency......................................433.9MHz 250KHz
Power Gain................................................................................10dBM
Effective operating range.....................................................about 35M
(clear line of sight)
Infrared Receiver Section: Tuning Frequency...........................38 KHz
Infrared Emitter Section: Carrier Frequency(R/C).....................38 KHz