Konig Electronic Wireless RF speakers User Manual
Page 4
4
6. The BASS BOOST button can be used to enhance the bass sound depending on your own music
preferences. Turn bass/boost effect ON by simply pressing the button, press it once again to turn it
OFF.
7. To switch off the loudspeakers, turn the VOLUME ON/OFF knob until the click sound is heard and
the LED light goes off.
8. The transmitter will cut off automatically if there is no/weak operation input signal from the audio
source for 4 minutes. If the signal comes back, the transmitter will start again automatically.
Specifications:
Transmission frequency: 863 MHz
•
Frequency response:
30 Hz – 11 KHz
•
S/N ratio:
55 dB
•
Music Power:
2 x 3.5 W (RMS)
•
Power transmitter:
12 V, 200 mA
•
Power loudspeakers:
12 V, 550 mA or 6 x AA batteries
•
Battery lifetime:
± 30 hours or more (depending on volume and bass boost)
•
Range:
100 m (outdoors), 30 m (indoors)
•
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
from mains and other equipment if a problem should occur. Do not expose
the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system
for these products.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION