Konig Electronic Bluetooth design headset - Manual (Page 4)

4
Function Status of the headset Operation Indicator tone
Mute microphone Conversation mode Briefly press O twice Continuous tone every
3 seconds
Cancel mute Conversation mode
(mute)
Briefly press O twice None
Remarks:
* Not all mobile phones support all the functions listed above. Please refer to your mobile phone’s user
manual.
* When the volume is adjusted to maximum or minimum, you will hear an indicator tone of “Ding-Dong”.
* For some mobile phones, when you press the button to answer the phone, the conversation will be sent to
the phone. If this happens, you can switch the call to the headset by using the conversation switch button
or trough operating on the mobile phone. Please refer to your mobile phone’s user manual for further
information. It means you can check your phone setting and transfer the conversation back to the Bluetooth
headphone.
5. Wearing the headset
Hook the headset over both ears by using both hands and you can adjust it as you please (see picture).
6. Playing music
When the headset connects with the mobile phone or Bluetooth transmitter, you can enjoy music wirelessly
through the headset.
Function Status of headset Operation Indicator tone
Volume up Playing music Briefly press + and then
release (or hold) it
None
Volume down Playing music Briefly press – and then
release (or hold) it
None
Pause Playing music Briefy press O None
Revert Pause Briefy press O None
Last song Playing music Briefly press < and then
release it
None
Next song Playing music Briefly press > and then
release it
None
Remarks:
* For some mobile phones, when you play music, the music will be transmitted to the speaker of the phone.
In this case you should choose “transmit the sound through Bluetooth” in the phone settings. Please refer
to the manual of the phone.
* When the volume of the headset is adjusted to maximum or minimum you will hear a tone of “Ding-Dong”.
* To remotely control the functions of last song / next song / pause / revert, your mobile phone needs a
Bluetooth transmitter which supports AVRCP. Please refer to the manual of the mobile phone for further
information.