Konig Electronic 5 port Ethernet switch 100/1000 Mbps - Manual (Page 2)

2
ENGLISH
How To Use The Switch
First, plug the Ethernet cable into one of the eight sockets on the rear of the switch. Then plug the second Ethernet cable
into another one of the sockets on the rear of the switch. You can now make a connection with a Windows ® /Apple ® based
PC.
LED Indicator Specifications
LED Color Status Description
Power Green ON This indicator lights when the switch is turned on
- OFF Check the power connection if this indicator is not lit
Link Green ON Indicates that the switch is connected at 1000 Mbps
Blinking Indicates that the switch is transmitting/receiving data with 1000 Mbps
Orange ON Indicates that the switch is connected at 10/100Mbps
Blinking Indicates that the switch is transmitting/receiving data with 10/100 Mbps
- OFF Indicates that the connection has failed
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by an authorized
technician when service is required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to
incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby
recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should not be
mixed with general household waste. There is a separate collections system for these products.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION