Directed Electronics OHW17 User Manual

Page 14

weerr U

p//D

n tth

hee D

Diissp

pllaayy M

niitto

orr

The unit will power up when the display monitor is unlatched and pulled down. (If the unit does

not power up, press the Power

button on either the remote or the Power

button on the

right side of the monitor.

To turn the power off to the unit, press the POWER

button on the remote. The power will also

shut Off when the display monitor is placed in the closed and latched position.

If the hand

icon or “INVALID KEY” displays in the upper left-hand corner of the screen when

using the remote, it indicates that the command issued is not allowed during the mode that the

monitor display is presently in, or is not available on this system.

P ((P

PIIC

E--IIN

N--P

PIIC

E//S

LIIT

T S

N))

Select this feature by pressing

on the remote or the

button on the monitor to display

PIP or Split Screen viewing of a total of two inputs from the DVD, or the A/V inputs. When the sys-

tem is in PIP or Split Screen mode, the source feature described below only works on the small

inserted picture or on the split picture displayed on the right side of the monitor (if the optional

DVD player is installed).

OTTEE:: The switch on the HP200 headphones allow the listener to switch between

the two pictures (PIP or Split Screen). The IR button on the remote turns
the audio to the headphones On/Off.

E ((M

E))

Press the

(SOURCE) button on the remote or the

button on the monitor to select the

input signal AV1, AV2 (or the optional DVD player or Hard Disk drive, if installed).