Operation test – Dell fi-412PR User Manual

Page 12

8 |

2.3. Operation Test

After installing the Imprinter, check if the printing
operation can be done in the Offline Print Test mode of the
scanner.

1. While pressing the [Function] button on the

operator panel, press the button.

Continue pressing the [Function] button.

2. Release the [Function] button when the Function

Number Display changes from [P] to [b].

3. Place a blank document into the ADF paper

chute

ATTENTION

Use A4 or Letter size paper. If the size is

smaller than A4 or Letter, printing may not
complete successfully.

Confirm that the Print Cartridge is

positioned within the document width.

4. Press [Scan] button

to test.

The paper will feed into the ADF, and the Imprinter

will print out the

Print Test Characters starting at

5mm from the paper’s edge

HINT

Print Test Patterns

Test Pattern 1 (Horizontal):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000

Test Pattern 2 (Horizontal）:
abcdefghijklmnopqrstuvwxyz{|}~ 00000000

Test Pattern 3 (Horizontal):
!”#$%&()*+,-./0123456789:;<=>?@00000000

Test Pattern 4(Vertical):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000

Test Pattern 5 (Vertical):
abcdefghijklmnopqrstuvwxyz{|}~ 00000000

Test Pattern 6 (Vertical):
!”#$%&()*+,-./0123456789:;<=>?@00000000

When multiple sheets of documents are placed in the
ADF, the Test Print repeats patterns from 1 through 6.
The numbering data portion ”00000000” changes from
0 (Zero) with increment of 1(one).
(One test pattern is printed at a time. Press the [Scan]
button to continue printing the next test pattern.)

5. To stop Offline Print test mode, press the

button. The scanner will switch off.

5mm

d e f g h

Feeding direction

Print Test Sample

Function

Send to

Scan

Function Number Display