HITEC ENERGY SPORT ESC SERIES - Manual (Page 5)

USING THE ESC [CONT.]
3. The motor will emit two sets of audible tones in succession. This
tells you that the ESC is armed and ready to use. The first set of tones
counts the number of cells in the battery and the second set indicates
the brake setting.
PROGRAMMABLE FUNCTIONS
The Energy Sport line has several programmable features that
allow the user to customize the ESC to their specific application.
Programming can be done through the transmitter or by using the
optional programming card. (PN# 29051).
Features that can be programmed are:
• Brake
• Battery Type (NiCd, NiMH, or LiPo)
• Low Voltage Cut-Off Protection Threshold
• Low Voltage Cut-Off Type
• Acceleration
• Timing
• Switching Frequency
FACTORy DEFAULT SETTINGS
• Brake: OFF
• Battery Type: LiPo with Automatic Cell Detection
• Low Voltage Cutoff Threshold: Medium (3.0V/60%)
• Timing Setup: Automatic
• Acceleration: Soft Acceleration
• Governor Mode: RPM OFF
• Frequency: 8 kHz
• Low Voltage Cutoff Type: Reduce Power
ENTERING THE PROGRAMMING MODE
Use the following steps to place the ESC in the programming mode:
1. Turn on your radio and set the throttle stick to top, full “ON”
positon (100%).