beautypg.com

P12 p13 – HITEC Q-Cop 450 User Manual

Page 7

background image

p12

p13

section 3

section 3

Micro SD Card Slot:

Before using the Q-Cop 450 to take pictures or record videos, please insert the Micro SD card into the card
slot while the power is OFF. The Q-Cop 450 Micro SD card supports a maximum of 32GB capacity cards.

quadcopter preparation

quadcopter preparation

Front Indicator

Rear Indicator

Tail Indicator

Flight Indicator:

There are three LED Flight Indicators: the Front indicator, Rear indicator and Tail indicator. When the
quadcopter switch is turned on, the LED Flight Indicators will be lit. The Front indicator is green and the Rear
indicator is red. [Note: Hereafter use Green/Red Indicator to describe Front/Rear indicators respectively].

Function

Front Indicator [Green]

Flight Navigation Instructions
1st Level Low Battery Alarm
2nd Level Low Battery Alarm
Barometer Abnormal State

Remains ON
Slow Blink [1sec ON , 1sec OFF]
Fast Blink twice at 1sec intervals
Remains ON

GPS Abnormal State
Compass Abnormal State
Compass Needs Calibration
Accelerometer Abnormal State
Accelerometer Needs Calibration
Gyro Abnormal State
Gyro Needs Calibration
Transmitter Signal Status Indication
GPS Searching Satellite Status Indication

Remains ON
Fast Blink
Slow Blink
Fast Blink
Switches ON>OFF>ON
Remains ON
Remains ON

Rear Indicator [Red]

Remains ON
Slow Blink [1sec ON , 1sec OFF]
Fast Blink twice at 1sec intervals
Slow Blink once at 3sec intervals
Fast/Slow Blink twice at 3sec intervals
Remains ON
Remains ON
Fast Blink
Switches ON>OFF>ON
Fast Blink
Slow Blink

Fast Blink
Slow Blink

Tail Indicator [Red]

Onboard Camera:

The Q-Cop 450’s camera power is supplied by the quadcopter’s battery. The camera power is on when the
power switch is turned on. Users can take photos and record videos by pressing the camera function key, or
through the Hitec AEE App. The camera supports single shot and continuous shooting mode, and video capture
resolution is up to 1080P / 30fps (N system) 1080P / 25fps (P system) Full HD video.

Camera Specifications:

Resolution
Image Resolution
Video File Formats
Storage

Maximum1080P / 30fps (N System) 1080P / 25fps (P System)
4608 x 3456
MOV (H .264 Compression)
External Micro SD Card, Up to 32GB

TV System

P / N System Optional

Camera Function Keys:
Photo Capture Function:
Press the airborne camera button on the transmitter to take pictures. Each press
snaps one photo.
Video-Recording Function: The Q-Cop 450 quadcopter automatic recording is set to ON as a default
setting. While video recording, you can press the Stop Button on the transmitter to stop recording, or press
the Record Button to restart video recording.
Camera Data Copy:

When the Q-Cop 450 power is switched OFF, remove the Micro SD card from the Micro SD card slot, and
connect to a computer with a card reader to easily copy camera photos and videos.
[Quadcopter power must be OFF while removing the Micro SD Card.]