HITEC FunJet Ultra - Manual (Page 8)

8
Kit Order No. 21 4245
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you
are completely satisfied with the contents of your kit. However, we would ask you to check all the parts before you start
construction, as we cannot exchange components which you have already worked on. If you find any part is not acceptable for
any reason, we will readily correct or exchange it after we have checked it. Just send the component to our Model Department,
with adequate postage pre-paid. Please be sure to fill in the complaint form, duly completed.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in
terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we
cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating them
safely requires a certain level of technical competence and manual skill, together with discipline and a responsible
attitude at the flying field. Errors and carelessness in building and flying the model can result in serious personal injury
and damage to property. Since we, as manufacturers, have no control over the construction, maintenance and
operation of our products, we hereby expressly point out these hazards and emphasise your personal responsibility.
Additional items required:
MULTIPLEX radio control system components for the FunJet ULTRA:
Recommended components
2 x Nano Pro MG digi4 servo
Order No. 6 5117
alternatively: Nano Pro KARBONITE® Order No. 6 5118
RX-6-DR light M-LINK receiver Order No. 5 5809
2 x 30 cm servo extension lead Order No. 8 5031
Recommended power system: FunJet ULTRA power set Order No. 33 2647
Contents: C3514 - 2900 brushless motor Order No. 33 3091
MULTIcont BL-70 S-BEC speed controller Order No. 7 2287
6” x 5.5” propeller Order No. 73 3195
Propeller driver and spinner, for 4 mm Ø shafts, prop bore 8 mm Order No. 33 2329
or
FunJet ULTRA power set, Li-BATT powered
Order No. 33 3647
Contents as # 33 2647, plus LiBATT FX 3/1-3200 (M6) battery
Flight battery
MULTIPLEX LiBATT FX 3/1-3200 (M6) flight battery
Order No. 15 7371
Battery charger:
MULTIcharger LN-6015 EQU
Order No. 9 2532
Charge current 100 mA ... 6 A
1 - 15 NiCd / NiMH cells and 1 - 6 Lithium-Polymer (LiPo) cells
Adhesive: Zacki ELAPOR® 20 g VE 20 Order No. 59 2727
Zacki ELAPOR® super liquid, 10 g VE 20 Order No. 59 2728
Tools:
Scissors, combination pliers, balsa knife, screwdriver, 4 - 5 mm Ø bradawl or small round file.
Specification:
Wingspan
783 mm
Fuselage length 750 mm
All-up weight approx. 875 g
Wing area approx. 14.5 dm²
Wing loading 60 g/dm²
RC functions Aileron, elevator (delta mixer required) and throttle