Hanna Instruments HI 9033 - Manual (Page 9)

17 16
WARRANTY
CONDUCTIVITY & TDS CALIBRATION SOLUTIONS
HI 7030M 12880 μS/cm solution, 230 mL bottle
HI 7030L 12880 μS/cm solution, 500 mL bottle
HI 8030L 12880 μS/cm solution, 500 mL FDA bottle
HI 7031M 1413 μS/cm solution, 230 mL bottle
HI 7031L 1413 μS/cm solution, 500 mL bottle
HI 8031L 1413 μS/cm solution, 500 mL FDA bottle
HI 7033M 84 μS/cm solution, 230 mL bottle
HI 7033L 84 μS/cm solution, 500 mL bottle
HI 8033L 84 μS/cm solution, 500 mL FDA bottle
HI 7034M 80000 μS/cm solution, 230 mL bottle
HI 7034L 80000 μS/cm solution, 500 mL bottle
HI 8034L 80000 μS/cm solution, 500 mL FDA bottle
HI 7035M 111800 μS/cm solution, 230 mL bottle
HI 7035L 111800 μS/cm solution, 500 mL bottle
HI 8035L 111800 μS/cm solution, 500 mL FDA bottle
HI 7039M 5000 μS/cm solution, 230 mL bottle
HI 7039L 5000 μS/cm solution, 500 mL bottle
HI 8039L 5000 μS/cm solution, 500 mL FDA bottle
HI 7032M 1382 ppm (mg/L) solution, 230 mL bottle
HI 7032L 1382 ppm (mg/L) solution, 500 mL bottle
HI 7036M 12.41 ppt (g/L) solution, 230 mL bottle
HI 7036L 12.41 ppt (g/L) solution, 500 mL bottle
OTHER ACCESSORIES
HI 76302W 4-ring conductivity probe with built in temperature
sensor and 1 m (3.3') cable
HI 98501 ChecktempC electronic thermometer (-50.0 to 150°C)
HI 710005 115 Vac / 12 Vdc power adapter, US plug
HI 710006 230 Vac / 12 Vdc power adapter, European plug
HI 721317 Rugged carrying case
HI 731326 Calibration screwdriver (20 pcs)
ACCESSORIES
All Hanna Instruments meters are warranted for two years
against defects in workmanship and materials when used for their
intended purpose and maintained according to instructions.
Electrodes and probes are warranted for a period of six
months.
This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument.
If under warranty, report the model number, date of purchase, serial
number and the nature of the failure. If the repair is not covered by
the warranty, you will be notified of the charges incurred.
If the instrument is to be returned to Hanna Instruments, first obtain
a Returned Goods Authorization number from the Customer Service
department and then send it with shipping costs prepaid.
When shipping any instrument, make sure it is properly packaged for
complete protection.
All rights are reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner.
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.