Hanna Instruments HI 9835 - Manual (Page 3)

5 4
SPECIFICATIONS
Range EC 0.00 to 29.99 μS/cm
(Autoranging) 30.0 to 299.9 μS/cm
300 to 2999 μS/cm
3.00 to 29.99 mS/cm
30.0 to 200.0 mS/cm
up to 500.0 mS/cm actual
(*) conductivity
TDS 0.00 to 14.99 ppm
(Autoranging) 15.0 to 149.9 ppm
150 to 1499 ppm
1.50 to 14.99 g/L
15.0 to 100.0 g/L
up to 400.0 g/L actual
(*) TDS (with 0.80 factor)
NaCl 0.0 to 400.0 %
Temp. 0.0 to 60.0 °C
Resolution EC 0.01 μS/cm (0.00 to 29.99 μS/cm)
0.1 μS/cm (30.0 to 299.9 μS/cm)
1 μS/cm (300 to 2999 μS/cm)
0.01 mS/cm (3.00 to 29.99 mS/cm)
0.1 mS/cm (over 30.0 mS/cm)
TDS 0.01 ppm (0.00 to 14.99 ppm)
0.1 ppm (15.0 to 149.9 ppm)
1 ppm (150 to 1499 ppm)
0.01 g/L (1.50 to 14.99 g/L)
0.1 g/L (over 15.0 g/L)
NaCl 0.1 %
Temp. 0.1°C
Accuracy EC ±1% of reading ± (0.05 μS/cm or 1 digit)
TDS ±1% of reading ± (0.03 ppm or 1 digit)
NaCl ±1% of reading
Temp. ±0.4°C
Typical EMC EC ±1% of reading
Deviation TDS ±1% of reading
NaCl ±1% of reading
Temp. ±0.1 °C
FUNCTIONAL DESCRIPTION
1) Power adapter socket
2) Probe connector
3) Liquid Crystal Display (LCD)
4) ON/OFF key, to turn the meter on and off
5) ALT key, to activate alternate key function
6) RANGE/FIXED key, to select measurement range or (with ALT)
freeze the current range on the LCD
7) CAL/CALT key, to enter calibration mode
8)
▼ CFM key, to move down or (with ALT) confirm values
9) ATC/TC key, to select temperature compensation mode or (with
ALT) view the temperature coefficient value
10) ▲ FNC key, to move up or (with ALT) enter setup mode
(*) Actual conductivity (or TDS) is the conductivity (or TDS) value of a solution
without temperature compensation.