Hanna Instruments HI 9146 - Manual (Page 17)

17
Item Description Valid values Default
SAL Salinity value 0 to 80 g/L 0
ALt Altitude value 0 to 4000 m 0
Time Time (hh:mm) 00:00 to 23:59 00:00
Date Date (mm.dd.yyyy) 01.01.2000 to 12.31.2099 01.01.2009
bEEP Beep Status ON/OFF OFF
LIGH Auto-off backlight OFF or 1, 5, 10 min 1
A.OFF Auto power off OFF or 5, 10, 20, 60 min 20
Temperature Unit ºC or ºF ºC
Setup mode allows viewing and modifying the following parameters:
• Salinity value (SAL)
• Altitude value (ALt)
• Current Time (hour & minute)
• Current Date (month, day & year)
• Beep Status (bEEP)
• Instrument ID (InSID)
• Auto-off backlight (LIGH)
• Auto power of (AOFF)
• Temperature Unit
To enter SETUP mode, press
Setup while the
instrument is in measurement mode.
Select the desired setup parameter using the
ARROW keys.
Press
CAL if you want to change the item
value. “ CFM” tag and the selected item (e.g.
hour, in setting up the correct time) will start
blinking.
Press the
ARROW keys to change the
displayed value.
If there is another item to be set (e.g.
minutes), press
Range. The other item will
start blinking.
Press the
ARROW keys to change the displayed value.
Press CFM to confirm or CAL to escape.
Press the ARROW keys to select the next/previous parameter.
Press Setup to exit SETUP menu at any time.
The following table lists the SETUP parameters, their valid values range
and the factory settings (default):
S E T U P S E T U P S E T U P S E T U P S E T U P