Dual XDVD8183N - Manual (Page 32)

XDVD8183N OPERATION
31
AM/FM Tuner Operation
AM/FM Tuner Mode
Band
Manual Tuning
Seek Tuning
Storing Presets
Auto Store Presets
Preset Scan
From the main menu, touch TUNER icon to select AM/FM Tuner mode.
From the remote control or the front panel:
Press MODE until TUNER is displayed on the screen.
Touch on the screen repeatedly until the desired band is displayed, FM-1,
FM-2, FM-3, or AM.
Press the BAND button to switch between bands, FM-1, FM-2, FM-3, AM.
From the remote control:
Press the BAND button.
Touch on the screen to tune to the next higher frequency step.
Touch on the screen to tune to the next lower frequency step.
Touch and hold either or on the screen to continue tuning across
multiple stations.
From the remote control:
Touch
or to perform manual tuning.
Touch on screen to tune to the next higher strong station.
Touch on screen to tune to the next lower strong station.
Press on front panel to tune to the next higher strong station.
Press on front panel to tune to the next lower strong station.
From the remote control:
Press
or to tune to the next higher strong station.
Press or to tune to the next lower strong station.
There are 36 FM and 12 AM presets available in 4 bands.
After finding a frequency that you would like to store in memory, touch and hold
the screen on any of the frequencies in the preset station list until it turns yellow.
Touch and hold the icon to automatically program the 12 strongest stations
available into the presets in the current band.
Press and hold the AS/PS button for more than 2 seconds.
Touching the button will scan through all tunable presets in the current
band and play them for 10 seconds each.
Press the AS/PS button momentarily.