Hanna Instruments HI 955501 - Manual (Page 5)

9 8
All Hanna Instruments meters are warranted
for two years against defects in workman-
ship and materials when used for their in-
tended purpose and maintained according to
instructions.
The probes are warranted for six months.
This warranty is limited to repair or replace-
ment free of charge.
Damages due to accident, misuse, tamper-
ing or lack of prescribed maintenance are not
covered.
If service is required, contact the dealer from
whom you purchased the instrument. If under
warranty, report the model number, date of
purchase, serial number and the nature of the
failure. If the repair is not covered by the
warranty, you will be notified of the charges
incurred. If the instrument is to be returned to
Hanna Instruments, first obtain a Returned
Goods Authorization Number from the Cus-
tomer Service department and then send it
with shipment costs prepaid. When shipping
any instrument, make sure it is properly pack-
aged for complete protection.
All rights are reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
WARRANTY
HI 710004 Soft carrying case
HI 710007 Shockproof rubber boot, blue
HI 710008 Shockproof rubber boot, orange
4-wire Pt100 Probes (for HI 955501)
HI 768A Air/gas probe, with 1 m (3.3')
cable
HI 768L General purpose/liquid probe,
with 1 m (3.3') cable
HI 768P Penetration probe with 1 m (3.3')
cable
ACCESSORIES
205mm
8.1"
100mm
3.9"
3mm
0.12"
HI 768P
205mm
8.1"
100mm
3.9"
6mm
0.24"
205mm
8.1"
100mm
3.9"
3mm
0.12"
HI 768L
HI 768A
3 mm
0.12"
Hanna Instruments reserves the right to modify
the design, construction and appearance of its
products without advance notice.